PS Engineering PMA4000 TSO Dokumentacja Pobierz pdf (Strona 3)

September 2014 “Impresses”

TECHNICAL SPECIFICATIONS

PAR200A Audio Panel and Radio - FAA - TSO

Audio Selector/Intercom FAA TSO-C139

Communications Transceiver FAA TSO-C169a (PARTIAL)

Environmental Qualiﬁcation DO-160G A1C1BAESRXXXXXXZ B(XX)

ABATTBXXA2E2 XXX

Operating Temperature Range: -20º C to 55ºC , short term -40°C

to +70°C

Altitude: 35,000 feet

PAR200A Unit Weight 1.1 lb. (0.49 kg)

Rack with connectors 0.51 lb. (0.24 kg)

Voltage: 11-33 VDC

Maximum Current: 2.5 Amp (Externally protected by a

3A pull-type breaker)

AUDIO SELECTOR SPECIFICATIONS

Audio selector panel input impedance: 510 Ω

Input Isolation: -60 dB (min.)

Receiver Inputs: 4 (Com 1, Com 2, Nav 1, Nav 2)

Unswitched Inputs: 4

Transmitter Selections: 3 (Com 1, Com 2, Com 1/2)

Headphone Impedance: 150 – 1000 Ω

Headphone Output: 30 mW each headset, no clipping

<1% THD typical into 150 Ω)

Speaker Output (into 4 Ω) with no clipping

14 VDC: 3 Watts (min.) 28 VDC: 10 Watts (min.)

Microphone Impedance: 150 - 600 Ω

Intercom Positions: 4-place IntelliVox

ICS

Music Inputs: 2 (Independent, Stereo)

Distortion: <1% THD @ 30 mW into 150Ω

Mic Freq. Response, 3 dB: 300 Hz - 6000 Hz

Music Freq. Response, 3 dB: 20 Hz - 20 KHz

COM RADIO TRIG TY91

Channels (Transmit & receive) 760 channels, 25 KHz spacing

2280 channels, 8.33 KHz spacing

118.000 – 136.992 MHz

Power consumption Receive (no signal) 2.8W @ 14VDC

Transmit 3.2A

Input Voltage 11-33 VDC 5A Circuit Breaker.

Power output 6 watts (nominal) VSWR Tolerance

< 2:1 for best operation (5:1

without damage)

Receiver sensitivity -6dB SINAD @ 5µV (1KHz audio

with 70% modulation)

Temperature range -20 to +70 degrees Celsius

Dimensions W-2.5” x H-1.9” x D6.3” (plus

1.5” for harness) W-66mm

H-48mm x D-160 (plus 35mm for

harness)

Weight 0.77 lbs (0.350 k)

FCC ID: VZI00882

The PAR200A is an FAA Approved system that combines an audio control panel,

4-place stereo IntelliVox

intercom with Bluetooth

, and a remote mounted,

760-channel VHF aviation communications transceiver.

This system saves cockpit space, weight, and money over stand-alone independent

systems while providing the most sought after functionality.

The PAR200A is attractive for the aircraft that is used primarily for VFR missions

or as an audio panel/back-up com to more advanced systems. The elimination of

one panel mounted radio saves valuable panel space.

Seamless integration between the audio panel and the radio was the goal for

the best user experience possible, while keeping the system costs to a minimum.

The right half of the PAR200A is dedicated to the communication radio, with

an easy to read LCD display that shows the frequencies, which are controlled

through a concentric knob. This radio has active and standby frequencies, and

a standby frequency monitor mode that permits listening to both active and

standby frequencies.

The Pilot can store up to 5 frequencies in non-volatile memory so he can easily

tune to his frequently used channels. The radio also has autosquelch, so you will

always have optimal radio sensitivity.

The left half controls the audio panel for radio selection, intercom and music

volume, intercom modes, and multiple music mute mode control. The PAR200A

has two independent music inputs. Independent power supplies assure operation

in failsafe on the audio panel; the VHF radio can still be used.

The PAR200A can be configured as stand alone, as COM 1, or as COM 2. This

provides flexibility to allow the aircraft owner to decide if a second radio will be

used and in what position. The PAR200A includes a cockpit speaker amplifier for

additional flexibility.

An integrated Bluetooth

system allows the PAR200A to interface with cellular

telephones, giving the aircraft occupants ready access to their telephones. In

addition, the Bluetooth

will stream music from compatible devices like iPads,

and smart phones.

ORDERING INFORMATION PART NO.

PAR200A Audio Panel, Stereo Intercom, Com Radio ............................................ 050-228-0200

Warranty: 2-Year Pro Support Exchange Program, when installed by an authorized PS Engineering

Dealer.

PMA450

ORDERING INFORMATION PART NO.

PMA450 Audio Panel with IntelliAudio

, 6-Place IntelliVox

stereo intercom, Bluetooth

and Marker Beacon ........................................... 050-450-0100

PMA450 (same as above but without Marker Beacon Receiver) .................. 050-450-0200

WARRANTY

2-year Pro-Support exchange program, when installed by an authorized PS Engineering Dealer. After the

warranty expires, a fixed repair fee will cover any report. See Warranty information in the Installation Manual.

TECHNICAL SPECIFICATIONS

Approval Basis FAA TSO C139a, C35d, C71

Certification Documents RTCA, Inc. DO-143, DO-160G, DO-214A,

DO-178C, DO-254

Intercom 6-place Stereo

Transmitter Selections 4 (Com 1, Com 2, Com 1/2 Split,

Bluetooth TEL)

Switched Receiver Inputs 6 (Nav 1, Nav 2, MKR, AUX 1, AUX 2,

AUX 3)

Portable Electronic

Device Charging Port +5.0 VDC, 10 Watts from USB connector

Unswitched Inputs 4

Power Requirements 11-33 VDC, 3.5 Amps

Audio Output Power Speaker: 3 Watts (14V), 10 Watts (28V)

Headphone: 35mW each headset, no clipping <1%

distortion typical

Audio Frequency Response +/- 3db, 300 Hz to 6000 KHz

Entertainment Frequency Response +/- 3db, 20 Hz to 16 KHz

Music Inputs 2 (independent and user configurable)

Weight 1.5 lbs (with tray & installation kit)

Dimensions Height: 1.3 in. (3.3cm)

Weight: 6.25 in. (16.9cm)

Depth: 7.15 in. (18.16cm)

Environmental Qualifications RTCA DO-160G

Temperature Range Operating -20° – 55°C, Short Term

Operating -40° – +70°

Altitude 35,000 feet

Available Marker Receiver 75 MHz, Crystal Controlled, receiver

and indicator

External Marker Outputs Lights and MM sense output

CHECKLIST OF FEATURES:

Com 1, Com 2, Nav 1, Nav 2 capability

IntelliAudio

provides dimensional sound for easy discernment of

simultaneous radio sources

Optional Marker Beacon Receiver

Volume Light Bar Indicate Various Volume Levels

3 Customizable Switched inputs. Pilot creates custom labels to fit

specific aircraft equipment list.

6-place hi-fi stereo intercom with limitless distribution capability and

3 music mute modes.

USB charger for portable devices including iPhones

or iPads

Adjustable Volume levels for Speaker, Music 1, 2, and Bluetooth

inputs, and 2 of the 4 unswitched inputs and the optional Marker

Beacon Receiver

Two hardwired Music inputs as well as Bluetooth

music

Audiophile intercom, aircraft radio and music fidelity. Extremely

quiet digital intercom system.

No computer programming required, front panel configurable.

*GARMIN and GMA340 are trademarks of Garmin International, Inc. PS Engineering, Inc. is not associated or

affiliated with Garmin International, Inc. in any way.

The PMA450 begins our journey into the digital-audio domain. Our company

is known as the source of the vast majority of innovations in audio control

systems for General Aviation and the PMA450 opens up completely new

dimensions for audio panels with valuable features and an intuitive interface.

Although the PMA450 has a superset of the capabilities of the PMA8000BT,

Pilot’s access to new advanced features is significantly more intuitive. Pilots

who currently are flying with the PMA8000BT will have all of the advantages

of their current system along with all of the new capabilities of the PMA450.

IntelliAudio

is a patented technology that we have licensed from the United

States Air Force. Originally designed for fighter pilots who are inundated with

multiple types of audio signals, the PMA450 now brings this technology to

GA Pilots.

For instance, when wearing stereo headsets, Com 1 will appear to come from

the Pilot’s 10 o’clock position while Com 2 will appear to come from the

2 o’clock position. Because the method used to create this audio environment

not only makes it possible for the Pilot to hear both radios at the same time,

it allows the brain to more easily discern one com from the other. With

IntelliAudio

’s digital audio processing, the radio and intercom audio is

incredibly clean, clear and crisp.

Our highly acclaimed patented automatic VOX (IntelliVox

) is also an integral

part of the intercom system of the PMA450, completely eliminating manual

intercom squelch adjustments.

Through the use of 3 soft-keys and a graphic display, the Pilot visualizes the set

up of the audio panel. This makes making changes to the audio configuration

simple. This approach means a Pilot guide is almost unnecessary.

In addition to Nav 1 and 2 switched inputs, there are three Pilot definable

switched inputs that can be named to reflect actual equipment in the aircraft.

Finally, there is no requirement for an avionics shop to connect a computer

for initialization of the audio panel. All audio panel adjustments can be done

using front panel controls, eliminating the need to connect to an external

computer.

PAR200A

Remote

Mounted

Radio

WARRANTY

2-year Pro-Support exchange program, when installed by an authorized PS Engineering Dealer. After the

warranty expires, a fixed repair fee will cover any report. See Warranty information in the Installation Manual.

1 2 3 4 5 6 7 8

Komentarze do niniejszej Instrukcji

Brak uwag

PS Engineering PMA4000 TSO Dokumentacja Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Domofony PS Engineering PMA4000 TSO